Totonoe Skin Retouch User Guide

Totonoe Skin Retouch is a skin retouch plugin for Adobe Premiere Pro and After Effects. It detects skin automatically and evens out roughness, redness and shine while keeping edges, hair and natural skin texture.

This guide covers version 1.8.0 on Mac and Windows. For an overview, price and FAQ, see the product page.

System requirements

MacmacOS 13 or later. Apple Silicon and Intel (Universal Binary). Processed on a Metal-compatible GPU.
WindowsWindows 10 / 11 (64-bit). CPU only: the Windows version does not use the GPU, so it is slower than the Mac version.
Host appsAdobe Premiere Pro 2025 or later, Adobe After Effects 2025 or later. Developed and tested on the 2026 releases of both.
Other hostsDaVinci Resolve: a separate product (Mac only, Windows is not supported). This guide covers the Premiere Pro and After Effects version. Other hosts, including Final Cut Pro and Avid, are not supported.

Install

One install works in both Premiere Pro and After Effects, because the plugin goes into Adobe's shared MediaCore folder.

Mac

  1. Double-click SkinRetouch-Installer.pkg and follow the installer. It is signed and notarized by Apple, so Gatekeeper does not block it.
  2. In the full version, the license is set automatically. You do not need to enter a key or move any files.
  3. Quit After Effects or Premiere Pro completely, then start it again.
  4. Open the Effects panel. The effect Skin Retouch is in the Skin Retouch category.

The installed file is here:

/Library/Application Support/Adobe/Common/Plug-ins/7.0/MediaCore/SkinRetouch.plugin

Windows

  1. Close Premiere Pro, After Effects and Media Encoder before you install.
  2. Unzip the downloaded file and run the installer (.exe).
  3. The installer is not code-signed, so Windows SmartScreen may show “Windows protected your PC”. Click More info, then click Run. This screen appears because the installer has no Windows code signature. It does not mean the file has a problem.
  4. Follow the installer. In the full version, the license is set automatically.
  5. Start Premiere Pro or After Effects. The effect Skin Retouch is in the Skin Retouch category of the Effects panel.

The Windows version is installed into Adobe's shared MediaCore folder, C:\Program Files\Adobe\Common\Plug-ins\7.0\MediaCore\.

The official Windows version was added to the same full version product on November 16, 2026, so one purchase covers both Mac and Windows. If you already bought the Mac version on BOOTH, you can download the Windows version from your BOOTH library at no extra cost. The Gumroad product includes both the Mac and Windows installers.

Get the installers: full version (Gumroad) or free trial (BOOTH).

Quick start

The steps are the same in Premiere Pro and After Effects.

  1. Apply the effect

    Apply Skin Retouch to a clip or layer. Skin is detected automatically the moment you apply it.

  2. Choose a preset

    Pick Natural, Standard or Strong. If you are not sure, keep Standard.

  3. Adjust Amount

    Use Amount to set the overall strength up or down.

Most shots need nothing more. Turn on Compare (Show Original) at any time to check your result against the untouched source.

Before and after on the cheek and the side of the nose, using the default setting
Result with the default setting (Standard), cropped to the cheek and the side of the nose.

Presets

A preset sets six sliders at once: Smoothing, Texture, De-Shine, Blemish, Redness and Paleness.

PresetSmoothingTextureDe-ShineBlemishRednessPalenessUse for
Natural25600000A light touch that keeps the most texture
Standard (default)50400000Everyday interview and corporate work
Strong8030252580Difficult footage: harsh light, visible blemishes, shine

Custom is selected automatically as soon as you change any of those six sliders by hand. Choose a named preset again to return to its values.

Standard matches the default values of earlier versions, so opening an older project does not change how it renders.

Comparison of the original, Natural, Standard and Strong, with a cheek close-up in the bottom row
From left: original, Natural, Standard, Strong. The bottom row is a cheek close-up. (The labels inside this image are in Japanese: the first column is the original, the others are Natural “keeps texture, light”, Standard “default” and Strong “firm”.)

Parameter reference

Parameters are listed in the order they appear in the Effect Controls panel.

Main controls

ParameterRangeDefaultWhat it does
PresetNatural / Standard / Strong / CustomStandardSets the six retouch sliders at once. See Presets.
Auto DetectOn / OffOnEstimates the skin hue from the image on every frame, so you do not pick a color by hand. While it is on, Skin Color is ignored.
Temporal Stability0–10050Steadies Auto Detect across neighboring frames (the current frame and the two before it), so compression noise or a passing highlight does not make the mask flicker. It works only while Auto Detect is on. 0 turns it off.
Amount0–100100One dial that scales Smoothing, De-Shine, Blemish, Redness and Paleness together. Lower it to soften the whole look without rebalancing each slider. Texture is not scaled by Amount. At 0 the output matches the original, because texture is only restored where smoothing is applied.
Compare (Show Original)On / OffOffShows the untouched source so you can compare. Turn it off before you render.

Skin Selection

ParameterRangeDefaultWhat it does
Skin ColorColor / eyedropperA light skin tone (R 210, G 160, B 140)The skin tone used for detection when Auto Detect is off. Use the eyedropper on a mid-tone area of the cheek, avoiding shadows and highlights.
Hue Range0–90 degrees25How wide a range of hues counts as skin. Too narrow misses skin; too wide picks up clothing or background. 20–30 suits most footage.
Hue Softness0–10050Feathers the edge of the skin mask. 40–60 gives smooth transitions.
Show MaskOn / OffOffShows the detected skin area in white. Use it while you adjust detection, and turn it off before you render.

Smoothing

ParameterRangeDefaultWhat it does
Smoothing0–10050Strength of the edge-preserving skin smoothing. Edges, hair, eyebrows and eyelashes are protected. 40–60 is the typical working range.
Texture0–10040Restores fine detail (pores, natural grain) after smoothing, which prevents a plastic, painted look. Raise it when you raise Smoothing. 30–50 is typical.
De-Shine0–1000Reduces bright shine on the skin. Use it only on shots that need it, typically up to 40.
Blemish0–1000Makes small dark spots such as acne and small blemishes less noticeable. Eyebrows and eyelashes are protected automatically. Keep it moderate (up to about 50), because very high values can flatten natural shadows.

Color

ParameterRangeDefaultWhat it does
Redness−100 to +1000Adds (+) or removes (−) redness and flush in the skin. ±10–20 looks natural.
Paleness−100 to +1000Moves the skin lighter (+) or toward a tan (−). ±10–20 looks natural.

Output and help

ParameterRangeDefaultWhat it does
Output Mix0–100100Final blend between the retouched result and the original. 100 is the full result; lower values mix the original back in.
User Guide (button)Button—At the bottom of the effect. In the full version it is labeled User Guide and opens the usage guide in your web browser. In the trial it is labeled Buy on BOOTH and opens the full version page. The button does not affect rendering.

Recommended workflow

  1. Leave Auto Detect on. It handles most footage without any setup.
  2. Check the mask. Turn on Show Mask and confirm the white area covers the skin without spilling onto clothing or background.
  3. Refine detection if needed. Adjust Hue Range and Hue Softness if the mask misses skin or picks up other areas.
  4. Pick a preset. Turn Show Mask off, then choose Natural, Standard or Strong.
  5. Set the strength with Amount. Set the overall level before you touch individual sliders.
  6. Fine-tune only what the shot needs. Add De-Shine for shine, Blemish for spots, and Redness or Paleness for tone.
  7. Final check. With Show Mask and Compare off, review the shot at 100% zoom and at full-frame size.

Tips for common shots

Several people in the frame

The effect is applied to everyone with a similar skin tone. To retouch only one person, turn Auto Detect off and use the Skin Color eyedropper on that person, or combine Skin Retouch with a mask in Premiere Pro or After Effects.

Moving shots and changing light

  • With Auto Detect on, the skin hue is estimated on every frame. Keep Temporal Stability at its default of 50 (or raise it) if the mask flickers.
  • If the detected area jumps noticeably from shot to shot, switch Auto Detect off and pick the skin with Skin Color.
  • With Auto Detect off, pick Skin Color again for each shot whose lighting differs significantly.

For a step-by-step checklist, see how to check flickering skin retouch.

Log footage

Log footage (S-Log, V-Log and similar ungraded formats) places skin outside the expected color range, so detection becomes unreliable. Apply your color conversion (a Rec.709 LUT) or Lumetri Color first, and place Skin Retouch after it in the effect stack.

Background or clothing detected as skin

  • Turn on Show Mask and narrow Hue Range while you watch the white area.
  • Turn Auto Detect off and pick the skin with Skin Color. Beige walls, wood and warm interiors are typical backgrounds that get picked up.
  • If some of the background still gets softened, lower Amount until it is not noticeable.

Strong color casts from colored lighting

Widen Hue Range slightly and raise Hue Softness.

Trial and full version

Free trialFull version
FeaturesEvery feature of the full versionEvery feature
Video outputFaint diagonal stripes (a watermark) are added to the videoNo watermark
LicenseNone neededSet automatically by the installer
Button at the bottom of the effectBuy on BOOTHUser Guide
WhereBOOTH (free trial)Gumroad (full version), one-time purchase of US$65

The full version is a download product. Please test the free trial on your own footage before you buy.

The free Windows beta ended on November 15, 2026. From November 16, the beta runs as the trial and shows the watermark. To keep using it without the watermark, buy the full version and run its Windows installer.

Troubleshooting

The effect does not appear in the Effects panel

  • Check that the plugin is in the shared MediaCore folder: /Library/Application Support/Adobe/Common/Plug-ins/7.0/MediaCore/SkinRetouch.plugin on Mac, or C:\Program Files\Adobe\Common\Plug-ins\7.0\MediaCore\ on Windows.
  • Quit Premiere Pro or After Effects completely and start it again. Reopening a project is not enough.
  • In Premiere Pro, type “Skin Retouch” into the Effects panel search box. The category may be collapsed.

The mask picks up the wrong areas, or misses skin

  • Is the footage log? This is the most common cause. See Log footage.
  • Turn Auto Detect off and use the Skin Color eyedropper. If that fixes it, the footage does not suit automatic detection.
  • For a strong color cast, widen Hue Range slightly and raise Hue Softness.
  • If a skin-toned background is softened, narrow Hue Range and pick Skin Color again while you watch Show Mask. If some remains, lower Amount until it is not noticeable.

Playback is slow

  • In Premiere Pro, lower the Program Monitor’s Playback Resolution to 1/2 (or 1/4). If playback stutters at Full on 4K footage, 1/2 is usually a good first step. In After Effects, lower the preview resolution the same way.
  • On Mac, rendering uses the GPU through Metal. If the GPU path cannot be used, the plugin falls back to CPU processing, which is slower on high-resolution footage.
  • The Windows version runs on the CPU only, so it is slower than the Mac version. Lowering the playback resolution helps most there.
  • Judge performance from a final render or export. Real-time preview speed often does not match render time.

A watermark (diagonal stripes) appears on the image

The plugin renders with faint diagonal stripes when it finds no valid license. This is how the free trial works. If you bought the full version, reinstall with the installer from your purchase, then quit and restart the host app completely. If the stripes remain, contact support through BOOTH.

Windows shows “Windows protected your PC”

Click More info, then Run. The installer is not code-signed, which is why SmartScreen warns. If the installer reports that Premiere Pro, After Effects or Media Encoder is running, close it and run the installer again.

Known limitations

  • Large moles (roughly 7 px across or larger) are not removed by Blemish. This is intentional: the same protection keeps eyebrows and eyelashes from being erased.
  • Several people with similar skin tones are all affected together. See Several people in the frame.
  • The DaVinci Resolve version is a separate product (Mac only, Windows is not supported), so this guide does not cover it. The product in this guide runs in After Effects and Premiere Pro only.